Say hello to the BB-300, the bidet seat for anyone who wants the real thing without the wiring. Two nozzles. Pressure you dial in yourself. A lock that keeps the water off until you say so. And a seat that grips your bowl and refuses to budge.
Here is what makes it a favorite already.
A patented Child Lock, and the calm that comes with it
Here is the whole idea. The wash knob will not budge on its own. You press it in first, then rotate. Bring the lever back to center and the Child Lock sets itself again before you have left the room.
One motion, and a whole category of small annoyances goes quiet. It helps keep a bumped lever, a passing towel, or a curious hand from starting a wash nobody asked for, which is why the BB-300 makes so much sense in a bathroom the whole house shares.
Two nozzles, and the pressure is yours
Front wash forward, rear wash backward, all from one lever you can find without looking. Each wash carries its own pressure setting, so a gentle front rinse and a thorough rear clean live happily on the same seat. Everyone in the house gets the wash they want.
Both nozzles retract out of sight between uses, and at 2.7 inches tall the whole seat keeps a low profile.
Stay·Tite®: tighten it once, forget about it
Wiggling seats are no fun in the bathroom. Stay·Tite® ends that annoyance. Turn the nut until the lower portion snaps off, and that snap is your confirmation: perfectly torqued, impossible to over-tighten, and it will not work itself loose months from now.
Cleaning day is just as easy. Press the release button, slide the whole seat forward, wipe the bowl, and click it back on. The bolts never move.
You can do this yourself
Grab a wrench and a Phillips screwdriver. Everything else is in the box. Swap your old seat for the BB-300, connect the water, and you are finished, with clear step-by-step instructions walking you through it.
The BB-300 is also cUPC certified, which is the third-party plumbing certification building pros look for. Nice to have on your side whether you are the one turning the wrench or handing the job to someone else.
Questions partway through? Call us at 847.458.2334.
Built for elongated bowls
The BB-300 is sized for elongated toilets with standard 5.5 inch bolt spacing. Take a tape measure to yours with our 60-second fit check, or browse by shape in the Compatibility Guide.
Fresh water, your pressure, and a lock that has your back. Toilet paper never stood a chance, because Water Does It Better®.
Weighing a plug-in seat against one that runs on water pressure alone? Do All Bidets Require Electricity? lays out the trade-offs in a couple of minutes.
Questions people ask
Q
How does the Child Lock work?
Press the knob in, then rotate it. Return the lever to center and the patented Child Lock sets itself again, so it stays engaged between uses.
Q
Do I need an outlet by the toilet?
Your water pressure powers everything, so the BB-300 goes anywhere a toilet does. It also keeps working straight through a power outage.
Q
How do I keep it clean?
Pull the nozzle out gently and wipe it with a soft cloth, sponge, or small brush and a neutral cleaning solution. Stick with neutral detergents on every part of the seat to keep the finish looking new.
Our best introductory model yet.
Two washes, your pressure, a patented Child Lock, and an install you can knock out today. All of it for $79.
Shop the BB-300 →Comparing models? Take the bidet quiz and we will match you in a minute.